User guide

5-44
Cisco WLAN Controller Web Interface User Guide
OL-7416-04
Chapter 5 Wireless Menu Bar Selection
Country
• NO (Norway), which allows 802.11a and 802.11b/g.
• NZ (New Zealand) which allows 802.11a and 802.11b/g.
• PH (Philippines) which allows 802.11a and 802.11b.
• PL (Poland) which allows 802.11a and 802.11b/g.
• PT (Portugal), which allows 802.11a and 802.11b/g.
• SE (Sweden), which allows 802.11a and 802.11b/g.
• SG (Singapore), which allows 802.11a and 802.11b/g.
• SI (Slovenia), which allows 802.11a and 802.11b/g.
• SK (Slovak Republic), which allows 802.11a and 802.11b/g.
• TH (Thailand), which allows 802.11b/g.
• TW (Taiwan), which allows 802.11a and 802.11b/g.
• US (United States of America), which allows 802.11b/g operation and 802.11a Low, Medium, and
High bands.
• USE (USA) which allows 802.11a and 802.11b/g.
• USL (USA Low), which allows 802.11b/g operation and 802.11a Low and Medium bands. (Used
for legacy 802.11a interface cards that do not support 802.11a High band.)
• USX (USA Extended) which allows 802.11a and 802.11b/g.
• ZA (South Africa) which allows 802.11a and 802.11b/g.
Note that both 802.11a and 802.11b/g bands must be disabled in order to change the country code.
Command Buttons
• Apply: Data is sent to the controller and made to take effect, but not preserved across a power cycle;
these parameters are stored temporarily in volatile RAM.
• Help: Request that the help page be displayed in a new browser window.