User guide

5-25
Cisco WLAN Controller Web Interface User Guide
OL-7416-04
Chapter 5 Wireless Menu Bar Selection
802.11b/g AP Interfaces > Details
802.11b/g AP Interfaces > Details
Use WIRELESS > Access Points > 802.11b/g Radios and then click Detail to navigate to this page.
This page lists primarily read-only attributes of the selected Cisco radio.
Table 5-30 AP Details
Parameters Description
Interface Type Displays the Cisco radio type as 802.11b/g.
AP Name This is the name assigned to the access point.
AP ID Identification number automatically assigned when the access point is
configured.
Admin Status Displays the interface status either enabled or disabled.
Operational Status Displays the Cisco radio operational status: either UP or DOWN.
Monitor Mode Displays the access point Monitor mode: Local (normal operation), Cisco
1030 remote edge lightweight access point (Cisco Aironet 1030 IEEE
802.11a/b/g remote edge lightweight access point), or Monitor
(monitor-only mode).
Location Customer definable location.
Table 5-31 Station Configuration Parameters
Parameters Description
Configuration Type Automatic or Custom.
Number of WLANs 1 (one) is the default.
Medium Occupancy
Limit
Indicates the maximum amount of time, in TU, that a point coordinator may
control the usage of the wireless medium without relinquishing control for
long enough to allow at least one instance of DCF access to the medium.
The default value is 100, and the maximum value is 1000.
CFP Period The number of DTIM intervals between the start of CFPs. It is modified by
MLME-START.request primitive.
CFP Max Duration The maximum duration of the CFP in TU that may be generated by the PCF.
It is modified by MLME-START.request primitive.
BSSID MAC address of the access point.
Beacon Period The rate at which the SSID is broadcast by the access point, from 100 to
600 milliseconds.
DTIM Period The number of beacon intervals that shall elapse between transmission of
Beacon frames containing a TIM element whose DTIM Count field is 0.
This value is transmitted in the DTIM Period field of Beacon frames.
Country String Identifies the country in which the station is operating. The first two octets
of this string are the two character country code.