User guide

5-21

Cisco WLAN Controller Web Interface User Guide

OL-7416-04

Chapter 5 Wireless Menu Bar Selection

802.11b/g Cisco Radios

Use WIRELESS > Access Points > 802.11b/g Radios to navigate to this page.

This page displays an overview of your 802.11b/802.11g Cisco radio network. The status of each

802.11b/g Cisco radio configured on this controller and its profile as detailed in the following table.

Details for each Cisco radio may be accessed by selecting the Configure or Details link located next to

the Cisco radio summary.

• The Configure link opens a list of configurable parliamentary for the identified Cisco radio

(802.11b/g Cisco Radios > Configure).

• The Details link opens a list of primarily read-only Cisco radio attributes (802.11a AP Interfaces >

Details).

Command Buttons

• Help: Request that the help page be displayed in a new browser window.

Table 5-24 Cisco WLAN Solution 802.11b/g Cisco Radio Summary

Parameter Description

AP Name Set the customer definable name of the access point.

Radio MAC The Media Access Control address of the 802.11b/g radio.

Admin Status Displays the interface status of either enabled or disabled.

Operational Status Displays the Cisco radio operational status: either UP or DOWN.

Channel Channel number of the access point.

Note The channels 1, 6, and 11 are non-overlapping.

Power Level The transmit power level of the access point where

1 = Maximum power allowed per Country Code setting, 2 = 50% power,

3 = 25% power, 4 = 6.25 to 12.5% power, and 5 = 0.195 to 6.25% power.

Note The power levels and available channels are defined by the Country Code

setting, and are regulated on a country by country basis.

Antenna Internal or external antennas.

Diversity Diversity Enabled or external antennas identified by connectors.