User guide

5-14
Cisco WLAN Controller Web Interface User Guide
OL-7416-04
Chapter 5 Wireless Menu Bar Selection
802.11a Cisco radio
AP 1130 802.11b AJAX-5GHz 5
AP 1000 802.11a;802.11b/g AIR-ANT1000 0
Table 5-13 WLAN Override
Parameter Description
WLAN Override Enable or disable WLAN Override for this 802.11a Cisco radio.
ID (only when WLAN
Override is enabled)
WLAN ID number.
WLAN SSID (only when
WLAN Override enabled)
Name of the WLAN.
Select (only when WLAN
Override enabled)
Checkbox to make a selection.
Note When you enable WLAN Override, the Operating System displays a table showing all current
Cisco WLAN Solution WLANs. In the table, select WLANs to enable WLAN operation, and
deselect WLANs to disallow WLAN operation for this 802.11a Cisco radio.
Table 5-14 RF Channel Assignment
Parameter Description
Current Channel Channel number of the access point.
Assignment Method Select one of the following:
• Global—Use this setting if your access point’s channel is set
globally by the controller.
• Custom—Use this setting if your access point’s channel is set
locally. Select a channel from the drop-down list.
Note The assignment method should normally be left at the global setting. This allows the controller
to dynamically change the channel number as determined by the Radio Resource Management
(RRM).
Table 5-12 Default AP Settings (continued)
AP Type Radio Type Antenna Pattern Antenna Gain (dBi)