Installation Guide

9-2

Cisco x90 Series Content Security Appliances Installation and Maintenance Guide

Chapter 9 Cisco S390 Web Security Appliance

Using Status LEDs and Buttons for Maintenance

This section describes the location and meaning of LEDs and buttons and includes the following topics

• Front Panel LEDs, page 9-2

• Rear Panel LEDs and Buttons, page 9-4

Front Panel LEDs

Figure 9-2 shows the front panel LEDs. Table 9-1 defines the LED states.

Figure 9-2 Cisco S390 Web Security Appliance Front Panel LEDs

6 Console Console port that directly connects a computer

to the appliance.

7 Management

interface 1

Gigabit Ethernet interface that is restricted to

management use only.

8 Management

interface 2

The secondary Management Port. This Gigabit

Ethernet interface cannot be used.

Item Port Description

1 Hard drive fault LED 6 Fan status LED

2 Hard drive activity LED 7 Temperature status LED

3 Power button/power status LED 8 Power supply status LED

4 Identification button/LED 9 Network link activity LED

5 System status LED