Installation Guide

8-5
Cisco x90 Series Content Security Appliances Installation and Maintenance Guide
Chapter 8 Cisco S190 Web Security Appliance
Summary of Features
Summary of Features
Table 8-3 lists the features of the Cisco S190 Web Security Appliance.
.
Data/Management port link status • Off—No link is present.
• Green—Link is active.
• Green, blinking—Traffic is present on the active link.
Rear unit identification
• Off—The unit identification LED is not in use.
• Blue—The unit identification LED is activated.
Table 8-2 Rear Panel LEDs, Definitions of States (continued)
LED Name State
Table 8-3 Cisco S190 Web Security Appliance Features
Feature Description
Chassis One rack-unit (1RU) chassis.
Processors One E5–2609 v3 processor.
Memory One 8GB DDR4-2133 DIMM
1
.
1. DIMM = dual inline memory module
Multi-bit error
protection
Multi-bit error protection is supported.
Remote Power
Cycle
The Remote Power Cycle can be accessed through a
1-Gb dedicated port.
Proxy Ports Two 1-Gb BASE-T Ethernet LAN ports.
Traffic
Monitoring Ports
Two 1-Gb BASE-T Ethernet LAN ports.
Management I/O Supported connectors:
• One 1-Gb BASE-T Ethernet LAN ports
• One RS-232 serial port
Power One or two 770 W AC power supplies.
Cooling Six fan modules for front-to-rear cooling.
Storage Two 600 GB hard disk drives (2.5” 10K SAS 4Kn) are installed into front-panel
drive bays that provide hot-swappable access for SAS drives.
Disk
Management
(RAID)
The appliance has a dedicated internal riser for a PCIe-style Cisco modular RAID
controller card.