User Guide

STEP 2. NETWORK
CHAPTER 4: INSTALLATION AND CONFIGURATION 59
10. Click Next.
The Transparent Connection Settings page appears. By default, when you run the System
Setup Wizard, the Web Proxy is deployed in transparent mode. When the Web Proxy is
deployed in transparent mode, you must connect it to a Layer 4 switch or a version 2
WCCP router.
Figure 4-6 System Setup Wizard — Network Tab, Transparent Connection Settings Page
Static Routes Table Optionally, you can add one or more static routes for management or
data traffic.
To add a static route, enter a name for the route, its destination network,
and gateway IP address, and then click Add Route. A route gateway
must reside on the same subnet as the Management or Data interface on
which it is configured.
To delete a static route you entered, click the Delete button next to the
static route entry in the table.
For more information about static routes, see “Configuring TCP/IP Traffic
Routes” on page 469.
Table 4-5 Routes for Management and Data Traffic Options in System Setup Wizard (Continued)
Option Description