User Guide

500
IRONPORT ASYNCOS 6.3 FOR WEB USER GUIDE
•The who command lists users, the time of login, idle time, and the remote host from which
the user is logged in:
•The whoami command displays the user name and group information:
•The last command displays information about users who have recently logged into the
appliance.
Using External Authentication
If you store user information in a RADIUS directory on your network, you can configure the
Web Security appliance to use the RADIUS directory to authenticate users logging in to the
appliance. You can use external authentication when logging into the appliance using HTTP,
HTTPS, SSH, and FTP. To set up the appliance to use an external directory for authentication,
use the System Administration > Users page in the web interface or the
userconfig >
external
CLI command.
Figure 22-9 shows where you enable external authentication on the System Administration >
Users page.
Figure 22-9 Enabling External Authentication
example.com> who
Username Login Time Idle Time Remote Host What
======== ========== ========= =========== ====
admin 03:27PM 0s 10.xx.xx.xx cli
example.com> whoami
Username: admin
Full Name: Administrator
Groups: admin, operators, config, log, guest
example.com> last
Username Remote Host Login Time Logout Time Total Time
======== =========== ================ ================ ==========
admin 10.xx.xx.xx Sat May 15 23:42 still logged in 15m
admin 10.xx.xx.xx Sat May 15 22:52 Sat May 15 23:42 50m
admin 10.xx.xx.xx Sat May 15 11:02 Sat May 15 14:14 3h 12m
admin 10.xx.xx.xx Fri May 14 16:29 Fri May 14 17:43 1h 13m
shutdown Fri May 14 16:22