User Guide

254
IRONPORT ASYNCOS 6.3 FOR WEB USER GUIDE
Figure 12-2 Editing End-User Acknowledgment Page Settings
3. In the End-User Acknowledgement Page section, enable the “Require end-user to click
through acknowledgement page” field. See “Custom Text and Logos: Authentication, and
End-User Acknowledgement Pages” on page 258 for information about how this feature
works with custom messages.
4. In the Time Between Acknowledgements field, enter the time interval the appliance uses
between displaying the end-user acknowledgement page.
You can specify any value from 30 to 2678400 seconds (one month). Default is 1 day
(86400 seconds). You can enter the value in seconds, minutes, or days. Use ‘s’ for
seconds, ‘m’ for minutes, and ‘d’ for days.
5. In the Inactivity Timeout field, enter the maximum IP address idle timeout.
You can specify any value from 30 to 2678400 seconds (one month). Default is four hours
(14400 seconds). You can enter the value in seconds, minutes, or days. Use ‘s’ for
seconds, ‘m’ for minutes, and ‘d’ for days.
6. In the Custom Message field, enter any text you want to appear on every end-user
acknowledgement page.
You can include some HTML tags in lower case to format the text. For a list of supported
HTML tags, see “Supported HTML Tags in Notification Pages” on page 258.
For example: