User Guide

198
IRONPORT ASYNCOS 6.3 FOR WEB USER GUIDE
3. Verify the Enable HTTPS Proxy field is enabled.
4. Enter the ports the appliance should check for HTTPS traffic in the Transparent HTTPS
Ports field. Port 443 is entered by default.
Note — This field only appears when the appliance is deployed in transparent mode.
5. Choose which root certificate to use for signing self-signed certificates the appliance sends
to clients:
• Generated certificate and key. Go to step 6 on page 198.
• Uploaded certificate and key. Go to step 7 on page 199.
For more information about how the appliance uses these root certificates, see “Working
with Root Certificates” on page 193.
Note — If the appliance has both an uploaded certificate and key pair and a generated
certificate and key pair, it only uses the certificate and key pair currently selected in the
Root Certificate for Signing section.
6. To generate a certificate and key:
a. Click the Use Generated Certificate and Key option.
b. Click Generate New Certificate and Key.