Release Notes

7
Release Notes for Cisco CDA Visual Quality Experience Application Release 3.10
Resolved and Open Caveats
Step 5 sed -i '/Banner/c\Banner /etc/issue.net' /etc/ssh/sshd_config
Step 6 Restart sshd service.
Note These steps must be done for every iso installation(clean/upgrade).
Load Balancing May Not Work Correctly When More Than 16 Interfaces Are
Attached to an Edge Router
With Cisco routers, there is a limitation in the edge router: Only the first 16 route matches for Feedback
Target addresses are considered when routing requests to the VQE-S servers from the access network. If
more than 16 interfaces to service Unicast Retransmission and RCC request are attached to the edge
router and are serving the same Feedback Target addresses, load balancing across the VQE-S servers will
not work correctly.
As an example, if four VQE-S servers that each have five Ethernet interfaces serving the same Feedback
Target addresses
are attached to the edge router, there is a total of 20 Ethernet interfaces serving the same
Feedback Target addresses and load balancing across the VQE-S servers will not work correctly.
For OSPF Routing, Ethernet Interfaces Require a Direct Layer-3 Connection to
Router
For OSPF routing on the VQE-S server, the Ethernet interfaces used for VQE-S traffic must have a direct
Layer-3 connection to the edge router.
Resolved and Open Caveats
The following sections provide information on resolved and open caveats:
• Resolved Caveats for Release 3.10
• Open Caveats for Release 3.10
Resolved Caveats for Release 3.10
The following caveats have been resolved in Cisco VQE, Release 3.10:
Click on the bug ID to view the bug details. This information is displayed in the Bug Search.
Ta b l e 1 Resolved Caveats for Cisco VQE Release 3.10
Bug ID Description
CSCur39303 POODLE : SSLv3 Vulnerability in VQE
CSCus69570 Evaluation of glibc GHOST vulnerability - CVE-2015-0235