Release Notes

17
Release Notes for Cisco CDA Visual Quality Experience Application Release 3.10
Installing VQE Release 3.10 Software
You can now choose the new password or passphrase.
A valid password should be a mix of upper and lower case letters,
digits, and other characters. You can use an 8 character long
password with characters from at least 3 of these 4 classes, or
a 7 character long password containing characters from all the
classes. An upper case letter that begins the password and a
digit that ends it do not count towards the number of character
classes used.
A passphrase should be of at least 3 words, 12 to 40 characters
long and contain enough different characters.
Enter new password:
Re-type new password:
Step 5 Enter the new password for root.
Step 6 Set the password for the vqe user ID.
Note No passwords are copied over to the new set of installed files.
Step 7 Check the /var/log/vqe/vqe.log file to ensure that no significant errors occurred during the ISO full
upgrade.
Step 8 Remove the ISO software installation CD from the CDE111/ CDE250 2V0 CD/DVD Combo drive and
close the drive tray.
Step 9 If you made changes to your earlier VQE Release 3.X /etc configuration parameters that are not now
under the control of the VQE CMS, the ISO full upgrade does not preserve these changes in Release
3.10. It is possible for you to manually recreate the customized configurations in the Release 3.10 /etc
configuration files. However, making manual changes in this manner is not supported or recommended.
You can examine the /vqe-etc/etc-diff file to determine the /etc file parameters (beyond the control of the
VQE CMS) that have been changed.
VCPT configuration files and VQE-S and VQE-C channel configuration files from an earlier VQE
Release 3.X can be used without modification with VQE Release 3.10.
Using an ISO Clean Installation to Install VQE Release 3.10 on an Earlier VQE
Release 3.X System
This section explains how to use an ISO clean installation to install VQE Release 3.10 on an earlier VQE
Release
3.X system.
Caution If you use an ISO clean installation for installing VQE Release 3.10, your previous VQE configurations
will not be backed up or restored. Use an ISO clean installation only when there is no requirement to
preserve previous VQE configuration values.