Release Notes

3
Release Notes for Cisco Video Surveillance High Definition IP Camera Release 2.3.2
OL-27159-01
Using the Upgrade Hot Fix Utility to Upgrade to Release 2.3.2
c. Click the Setup link to access configuration menus for the camera.
d. Click Administration, then click Firmware.
The Firmware Settings window appears.
Step 3 In the Firmware window, click the Upgrade button.
The Upgrade Firmware window appears.
Step 4 In the Upgrade Firmware window, click the Browse button, choose the upgrade file, and then click
Open.
The upgrade file may be stored on another PC.
Step 5 Click Upgrade.
Do not power down the IP camera during the upgrade procedure.
After you upgrade the firmware, the IP camera automatically restarts. It retains all configuration
information.
Using the Upgrade Hot Fix Utility to Upgrade to Release 2.3.2
Perform the following procedure to upgrade your IP camera to Release 2.3.2 only if the IP camera part
number and firmware release are either of the following:
• 74-5461-04 or 74-5459-04 and the IP camera firmware is 2.0.0
• 74-5461-05 or 74-5459-05 and the IP camera firmware is 2.3.1
Otherwise, use the procedure in the “Upgrading to Release 2.3.2” section on page 2.
Note You can find the IP camera part number listed on the camera user interface Home window, under the
General Information area.
Procedure
Step 1 Take these actions to obtain the upgrade hot fix utility:
a. Go to this URL:
http://www.cisco.com/cisco/software/release.html?mdfid=282582478&flowid=31387&softwareid
=282090156&os=Windows&release=2.3.2&relind=AVAILABLE&rellifecycle=&reltype=latest
b. Locate and choose the upgrade hot fix utility file, which is named
4xxx-HotFixUtilityInstallerV2.3.2.msi, and click Download.
c. Log in and follow the on-screen prompts to download the upgrade hot fix utility file to your PC.
d. Close Internet Explorer.
Step 2 Double-click the 4xxx-HotFixUtilityInstallerV2.3.2.msi file that you downloaded in Step 3 and follow
the on-screen prompts to install the utility on your PC.
During the installation process, the installer adds the Hot Fix Utility icon to your desktop.
Step 3 Double-click the Hot Fix Utility icon to open the utility.