Manualshelf

Quick Setup Guide

ManualsBrandsCisco ManualsCommunication SolutionsCisco Unity Express Version 2.3.2
12345678910
2-6
Cisco Unified Communications Express Historical Reporting Client Configuration Guide
OL-14986-01
Chapter 2 Installation and Configuration
Configuring Cisco UCE Historical Reporting Client
Configuration File SCH.ini
The SCH.ini file contains general instructions for the Scheduler, including the location of the Scheduler
database, the level of detail in which to record log file information, and how to handle missed schedules.
If a schedule was missed, when the Scheduler starts a dialog box asks whether you want to execute
missed schedules. Table 2-2 shows the parameters in the SCH.ini file.
MaxSizeOfLogFiles Maximum size of the log file. When the current log file reaches this size in KB, a new log
file is created by the Cisco UCE Historical Reporting Client.
• 1 (Integer) or greater. (Default: 1000.)
Note We recommend the 1000 KB value for this parameter because a log file that is
larger than 1000 KB can be difficult to read, and several large log files may occupy
a significant amount of disk space.
database (under [SCH]) Database file holding scheduling information in the directory: c:\Program Files\Cisco
Systems\CUCE Historical Reports\Scheduler.
Note If you change this parameter, you must also change the database parameter in the
SCH.ini configuration file to the same value. See the “Configuration File SCH.ini”
section on page 2-6.
• HistoricalReportsScheduler.mdb.
Provider (under [SCH]) Display only. Name of the provider.
SERVER (under
[CUE_DATABASE])
Display only. IP address or hostname of the server containing historical data for the
Cisco UCE Historical Reporting Client.
DATABASE (under
[CUE_DATABASE])
Display only. Main historical database on the Cisco UCE server used by the
Cisco UCE Historical Reporting Client.
UID (under
[CUE_DATABASE])
Display only. User identification used to log in to the Cisco UCE database on the
Cisco UCE server.
NETWORK (under[SCH]) Display only. Network library used by the Cisco UCE Historical Reporting Client when
connecting to the Cisco UCE scheduler.
MAXCONNECTIONS (under
[CUE_DATABASE])
Maximum number of connections.
NODE_ID (under
[CUE_DATABASE])
Cisco UCE node ID.
Ta b l e 2 - 1 hrcConfig.ini file: Parameters (continued)
Parameter (continued) Description and Default Value (continued)