Maintenance Manual

Record Server Configuration
VoIP Devices
72
Configure
Recording
Type
When clicked, Configure Recording Type allows you to assign a recording
type to one or more devices.
NOTE: You must select the devices before clicking the button.
• Server Recording—Choose this option if you are using Server
Recording (SPAN).
• Network Recording—Choose this option if you are using Network
Recording.
• Multiple Registration—Choose this option if you are using Multiple
Registration method. This method allows you to programmatically add
participants to an existing call.
• Single Step Conference—Choose this option if you are using Single
Step Conferencing method. This method allows you to choose register
up to three devices at a single, softphone-enabled extension.
• None—Choose this option if your are using no recording type.
• Unknown—Choose this option i f the recording type is unknown.
• End Point—Choose this option if you are using Endpoint recording.
• MediaSense Recording—Choose this option if your are using
MediaSense Recording.
You cannot configure the recording type for a User Profile device.
Configure
Agent
When clicked, Configure Agent allows you to assign one of the following
options to the device.
• Default Hoteling Agent—An agent logs into the device using the login
information for the default hoteling agent.
• User Login Required—An agent logs into the device using their own
login information.
NOTE: User Login Required is not supported for MediaSense Recording.
Remove From
Configuration
When clicked, Remove From Configuration allows you to remove one or
more devices from MediaSense Recording, Server Recording, and
Network Recording.
NOTE: You must select the devices before clicking the button.
Enable
Devices for
Recording
When clicked, Enable Devices for Recording allows you to search for
devices in Unified CM and enable those devices for recording in Quality
Management.
Synchronize
Devices With
Clusters
When clicked, Synchronize Devices With Clusters allows you to
synchronize devices changes from Unified CM with the list of devices in
the VoIP Devices window. It removes any devices that were deleted in
Unified CM and updates extensions for modified devices.
Button Description