Maintenance Manual

Site Configuration
Monitoring and Notification
52
Table 18. Monitoring and Notification fields
Field Description
Use
Monitoring/
Notification
Service
Enable this check box to use the MANA service. If enabled, at least one
notification method (event viewer, SNMP, or email) must be enabled as
well. This check box is enabled by default.
Polling Period Sets the interval at which the MANA service checks for the selected
notification triggers. Default = 10 minutes, Minimum = 0 minutes,
Maximum = 1440 minutes (1 day). The timer starts when the last polling
task is complete.
NOTE: When you change the polling period, it takes one polling cycle
before the new polling period goes into effect.
Use Event
Viewer
Notification
Select this check box to use the Event Viewer for displaying notification
messages. This check box is enabled by default.
Use SNMP
Notification
Select this check box to use SNMP for sending out notification messages.
Note that the Windows SNMP Services must be installed to be able to use
SNMP notification.
See “Installing Windows SNMP Service” in the Installation Guide for more
information.
SNMP
Configuration
Click this button to configure the SNMP connection (enabled only on the
Base server).
Use Email
Notification
Select this check box to use email for sending out notification messages.
SMTP
Configuration
Click this button to configure the SMTP email connection (enabled only on
the Base server). See “Managing Notification Email Addresses” on page
56 for more information.
Email
Addresses
The list of email addresses to which notification is sent. Maximum = 5
email addresses.
Add Click this button to add an email address.
Remove Click this button to remove an email address.
Edit Click this button to edit the selected email address.
Never Choose this option if you do not want to be renotified of a problem after
the initial notification.