Maintenance Manual

Site Configuration

Cisco MediaSense

Use the Cisco MediaSense window (Figure 7) to configure connection information for

the Cisco MediaSense cluster. Quality Management uses this information to download

call recordings from Cisco MediaSense.

NOTE: You can only change the information in the Cisco MediaSense

window from the Configuration Setup (PostInstall.exe) or Quality

Management Administrator on the Base server. The Cisco

MediaSense window in Quality Management Administrator on a client

desktop is read-only. See “Configuration Setup” in the Installation

Guide for more information on the Configuration Setup tool.

NOTE: The fields in this window are enabled if you choose the

MediaSense or Mixed options from the Telephony Signaling Method

drop-down list in the Cisco Unified CM window.

Figure 7. Cisco MediaSense window