Maintenance Manual

Site Configuration
Recording CTI Service
29
Managing Unified CM Clusters
This task describes how to add or delete a Unified CM cluster from the Cisco Unified
CM window.
TASK
• To add a new cluster, click Add New Cluster, complete the fields on the
tab created for the new cluster, and then click Save.
• To delete a cluster, select the tab for the Unified CM cluster you wish
to delete, click Remove Current Cluster, and then click OK to dismiss
the Delete Current Cluster dialog box.
Recording CTI Service
Use the Recording CTI Service window (Figure 6) to configure the connection
information for the Recording CTI Service.
NOTE: The fields in this window are enabled if you choose the CTI or
Mixed options from the Telephony Signaling Method drop-down list in
the Cisco Unified CM window.
Figure 6. Recording CTI Service window