Maintenance Manual

Site Configuration
Cisco Unified CM
28
Configuration Settings Used By Services
If you change the settings on the Cisco Unified CM window, Table 5 shows when your
changes take effect.
Table 5. When services start using the changed configuration settings
Primary CTI
Manager
Select this option if the Unified CM is the primary CTI Manager. There can
be only 1 primary CTI Manager. Once entered, a primary CTI Manager can
be reassigned, but not deleted. In a typical configuration, the Primary CTI
Manager is a subscriber, not a publisher.
Backup CTI
Manager
Select this option if the Unified CM is the backup CTI Manager. There can
be 1 or no backup CTI Manager.
Find
Subscriber
Click this button to use the AXL user to locate subscribers associated with
the publisher entered. This is a good way to validate the AXL user and to
populate the list of subscribers, if any are found.
None Select this option if there is no backup CTI Manager. Default setting =
selected.
Field Description
Service Configuration Settings Applied
Recording CTI Service Restart the service.
Quality Management
Administrator (VoIP
Devices)
Reload the VoIP Device window.
Network Recording
Service
No restart required. The next polling period applies the
configuration settings.
Desktop Recording
service
Restart the service.