Maintenance Manual

Site Configuration
Modifying Site Configuration Information
19
Site Configuration
Use the Site Configuration windows to modify the Quality Management environment.
The options that you see in the Site Configuration window depends on the environment
in which you installed Quality Management and the options that you chose to configure
during installation.
If you are running Quality Management Administrator on a client desktop, some
features are disabled under Site Configuration. You can only modify these features
from Quality Management Administrator or Configuration Setup (PostInstall.exe) on the
Base Services server. For more information about Configuration Setup, see the
Installation Guide.
NOTE: The Inclusion List does not appear in the Quality Management
Configuration Setup tool. It is located under the Site Configuration
node.
Modifying Site Configuration Information
The following task describes how to modify the site configuration information.
TASK
1. Expand the Site Configuration node in the navigation tree, and then select the
window you wish to modify.
S
TEP RESULT: The selected window appears in the right pane.
2. Enter the new data in the appropriate fields.
3. Click Save.
S
TEP RESULT: Modifications take effect after you save your changes.
System Database
Use the System Database window (Figure 3) to configure connection information for
the Quality Management system database.
NOTE: You can only change the information in the System Database
window from the Quality Management Configuration Setup