Installation Guide
Table Of Contents
- Overview
- Installing QM
- Introduction
- Prerequisites
- Installing QM Services
- QM Configuration Setup
- Setting Up NT Authentication for the Cisco Unified CC Database
- Setting Up Named Pipes for the Cisco Unified CC Database
- Installing QM Desktop Applications
- Using Automated Package Distribution Tools
- Removing QM
- Index
QM Configuration Setup
June 2007 35
Table 7. Cisco Unified CC Database fields
Field Description
Side A IP Address/
Host Name
The IP address or host name of the Cisco Unified CC
database, depending on which radio button is selected.
Side B IP Address/
Host Name
The IP address or host name of the redundant Cisco
Unified CC database, if one exists, depending on which
radio button is selected.
SQL Instance Name The SQL instance name. Default = CRSSQL.
SQL or NT Select the appropriate radio button to indicate if the
database login uses SQL or NT authentication. If you
select NT authentication, you must perform the
procedure detailed in "Setting Up NT Authentication for
the Cisco Unified CC Database" on page 45. Default for
Unified CCX systems = NT.
Login ID Login ID used to access the Cisco Unified CC database.
This user must have write permission to the database.
Password Password used to access the Cisco Unified CC database.
TCP/IP or Named Pipes Enter the type of connection, TCP/IP or Named Pipes. If
you select Named Pipes, you must perform the
procedure detailed in “Setting Up Named Pipes for the
Cisco Unified CC Database” in the QM Installation Guide.
Port If you select TCP/IP as the type of connection, enter the
port number used to connect to the database. Default =
1433.