Installation Guide
Table Of Contents
- Overview
- Installing QM
- Introduction
- Prerequisites
- Installing QM Services
- QM Configuration Setup
- Setting Up NT Authentication for the Cisco Unified CC Database
- Setting Up Named Pipes for the Cisco Unified CC Database
- Installing QM Desktop Applications
- Using Automated Package Distribution Tools
- Removing QM
- Index
Firewall Requirements
June 2007 17
Firewall Requirements
For QM to function correctly, the ports in Table 4 must be opened in the Windows
firewall before QM is installed. If the Microsoft Firewall is used and in operation when
QM is installed, the QM installation process opens all ports and programs as needed
except those for the Microsoft SQL Server (by default, 1433 and 1434).
If another firewall is used, or if you turn on the Microsoft Firewall after QM is installed,
these ports must be opened manually. See your firewall documentation for
instructions.
Table 4. QM Port Usage
Port Type Description
7TCPEcho port
1433
*
* If the default instance is used, the TCP port is 1433. If a different instance is used, the port number
is randomly assigned. See "Configure SQL Server Firewall Port Exceptions" on page 23 for
instructions on determining the randomly-assigned port number.
TCP MSSQL server port (named instance)
1434 UDP MSSQL server port
2303 UDP Funk port
8088 TCP Tomcat port
8448 TCP File Transfer Servlet (FTS) port
38983 TCP LDAP port
52101 TCP CTI port
52102 TCP CTI port
52103 TCP DB Proxy port
59100 TCP Controller port
DirAccessSynSvr.exe — Sync service