Installation Guide

Workforce Management Installation Guide 8.0
40 June 2007
The IP address and port number disappears from the CTI Servers list.
2. When you are done making your changes, click Finish.
The Workforce Management — Configuration Setup window closes.
Step 8. Rebooting the system
You might be prompted to reboot the machine if the Windows Installer Engine has
determined that your system requires a reboot to complete the install. If you do not
see the reboot dialog, you can ignore this step.
NOTE: If you rebooted the system before running the Configuration
Setup tool, you can ignore this step.
To reboot the system:
1. If the reboot dialog (Figure 15) appeared when you installed the WFM
application, click Yes to complete the installation and reboot the system.
Figure 15. Reboot dialog