Troubleshooting Guide

Logs and Debugging
September 2009 11
To reset Dr. Watson as your default debugger:
1. On the server hosting the QM Database services, click Start > Run.
2. In the Open field, type drwtsn32.exe and click OK. Dr. Watson for Windows
starts.
3. Configure the settings to match those shown in Figure 1.
Accept the default Log File Path and Crash Dump locations.
Set the Crash Dump Type to Full.
Clear the Visual Notification check box.
4. Click OK.
5. Click Start > Run.
Figure 1. Dr. Watson configuration settings