Administrator's Guide

20 Cisco Unified Web and E-Mail Interaction Manager System Administration Guide
10. On the Default route tab, in the Media Routing Domain field, from the dropdown list, select an MRD
configured for Unified WIM and Unified EIM (page 14).
Select an MRD
Configuring script selectors
A script selector is a keyword that identifies the ICM routing script for an activity request from Cisco Interaction
Manager to Unified CCE. Script selectors are used in the ICM routing scripts as part of the Dialed Number
node.
To configure a script selector:
1. Go to Start > All Programs > ICM Admin Workstation > Configuration Manager.
2. In the Configuration Manager window, browse to Tools > List Tools > Dialed Number/ Script Selector
List.
3. Double-click Dialed Number/ Script Selector List.
4. In the Dialed Number/ Script Selector List window, in the Select filter data section, click Retrieve. Then, in
the Dialed Number/ Script Selector section, click Add.
A new entry is created and the Attributes tab becomes editable.
5. On the Attributes tab, provide the following details:
 Routing client: From the dropdown list, select the routing client configured for the MR PG in step 9 in
“Configuring media routing peripheral gateways (MR PGs)” on page 17.
 Media routing domain: From the dropdown list, select the MRD configured for Unified WIM and
Unified EIM (page 14).
Important: Now install the MR PG and configure the MR PIM. For more information, see the
Unified CCE Installation Guide.