Information Guide

6
Cisco Unified Service Monitor 8.6 Compatibility Matrix
OL-25580-01
Table 5 provides the Cisco Unified Border Element (CUBE) support information.
Note Call Management Record (CMR) data will not be available in Service Monitor for CUBE, because
Unified Communications Manager does not support CMR for SIP trunks.
Table 6 lists the supported binary image for use on Cisco 1040 when used with Service Monitor 8.6.
Table 5 CUBE Support Information
Software Devices/versions
Cisco Unified Border Element (CUBE)
1
1. The Cisco IOS version is 15.1.3T.
Cisco 2800 Series ISR
Cisco 2900 Series ISR
Cisco 3800 Series ISR
Cisco 3900 Series ISR
Cisco 7200VXR Routers
Cisco 7301 Routers
Cisco AS5350XM Universal Gateway
Cisco AS5400XM Universal Gateway
Table 6 Cisco 1040 Binary Image
Binary Image Filename Configuration Notes
SvcMonAB2_102.img The SvcMonAB2_102.img binary image file is available on the Service Monitor server in the
NMSROOT\ImageDir folder.
Note NMSROOT is the directory in which Service Monitor was installed. The default value for
NMSROOT is C:\Program Files\CSCOpx.
To load the image onto Cisco 1040s, see Performing Post-Upgrade Configuration for Cisco 1040s
in Installation Guide for Cisco Unified Service Monitor 8.0.
Caution Installing binary image files other than SvcMonAB2_102.img can cause
severe problems.