Installation Guide

1. Enter the ID for the System Administrator account created during install. See What
Accounts and Passwords are Defined During the Installation? (page 53)
2. When prompted, enter the password for the System Administrator account.
The CLI is documented in the Administration Console User Guide for Cisco Unified
Intelligence Center (http://www.cisco.com/en/US/products/ps9755/
prod_maintenance_guides_list.html).
How Do I Test Server Connectivity?
There is a step to test network connectivity (page 34) during the installation of the Controller
and Member servers. You can also run a basic check that one server can connect to another
using this CLI command: utils network ping.
How Do I Use the Recovery Disk?
The installation package includes a Recovery Disk on CD media.
The purpose of this disk is to help you to recover from a catastrophic failure, such as an
unbootable system.
To use the Recovery Disk, insert it into the tray and boot up into it.
The Recovery Disk has the following options:
•
[S] /[s]: Swaps the active and inactive partitions (that is, boots the system with the earlier
active version, which is currently inactive). This option is displayed only if there is a valid
inactive partition in the system.
•
[W]/[w]: Windows Pre-Installation Set-up. Reimages the system and prepares it for a Windows
installation.
•
[F]/[f]: Checks the file system and automatically corrects it.
•
[M]/[m]: Checks the file system and manually corrects it.
•
[V]/[v]: Verifies the disk partitioning layout and displays the disk partitions on the screen.
•
[Q]/[q]: Quits the recovery disk program and asks you to reboot the system.
How Do I Uninstall?
There is no way to uninstall other than reinserting the installation DVD, which will reformat
the hard disk.
Installation and Upgrade Guide for Cisco Unified Intelligence Center Release 8.5(2)
49
Chapter 9: Frequently Asked Questions about the Installation
How Do I Test Server Connectivity?