Installation Guide

ThenIf

If the media check fails, the DVD is ejected and the

installation terminates. Contact your support provider for

assistance.

can safely skip the media check

when you install the Members.

Select No.You want to skip the media check.

A message displays at the bottom of the monitor: Running

the Cisco Uniﬁed Communications 8.0 system installer.

Please Wait...

Then the Product Deployment Selection screen opens.

Proceed to Step 3.

Step 3

The Product Deployment Selection screen states that the Cisco Uniﬁed Intelligence Center

product will be installed. This screen has only one choice—OK. Select OK to open the Proceed

with Install screen.

Clicking OK initiates a check for hard drive sanity, during which the installation checks for a

supported hardware platform with the correct number of disks.

A successful hardware check opens the Proceed with Install screen.

Note: If the server hardware is unsupported, a message is displayed indicating that the installation

cannot proceed, and the installation halts. If you require assistance understanding the message,

write it down to facilitate your conversation with your support provider. Refer to the Cisco

Uniﬁed Intelligence Center Bill of Materials (http://www.cisco.com/en/US/products/ps9755/

products_user_guide_list.html) for details on supported hardware.

Step 4

The Proceed with Install screen shows the version of the product that is currently on the hard

drive (if any) and the version of the product that is on the DVD. For the initial installation, the

version on the hard drive shows NONE.

Select Yes at the Proceed with Install screen to open the Platform Installation Wizard screen.

Step 5

In the Platform Installation Wizard screen, select Proceed to open the Apply Patch screen.

Step 6

Select No at the Apply Patch screen. You do not apply patches from the Installation wizard.

Refer to Chapter 7 - Software Upgrades (page 35) for instructions on upgrading Uniﬁed IC

software with Engineering Specials, Minor Releases, and Maintenance Releases.

Your selection of No opens the Basic Install screen.

Note: If you select Yes by mistake and open the Apply Patch screen, select Back.

Step 7

Select Continue at the Basic Install screen to enter the conﬁguration screens.

Installation and Upgrade Guide for Cisco Unified Intelligence Center Release 8.5(2)

Chapter 3: Beginning the Installation - All Nodes