Installation Guide
Beginning the Installation - All Nodes
The installation for Unified IC is delivered on DVD media. Run the DVD installation on each
node and use the same DVD for all nodes.
Note: All nodes in a must be running the same version of Unified IC.
This chapter contains the following topics:
•
Media and Hardware Check, page 15
•
Basic Install Configuration Information, page 17
Media and Hardware Check
Every installation begins with an optional pre-install media check and includes a hardware
check.
Step 1
Insert the installation DVD into the tray. Then restart or power on the server so that it boots
from the DVD.
You see messages as the pre-install script runs. When the pre-install script ends, the DVD Found
screen opens.
Step 2
In the DVD Found screen, you have the option to perform a media check to verify the integrity
of the DVD.
ThenIf
Select Yes to begin the verification of the media integrity.You want to check the media.
If the media check passes, select OK. Continue to Step
3.
NOTE that the media check can
take up to an hour. If the media
check for the Controller passes, you
Installation and Upgrade Guide for Cisco Unified Intelligence Center Release 8.5(2)
15
Chapter 3