Maintenance Manual

DescriptionCounter
•
1 = Replication setup script fired from this node. Cisco
recommends that you run utils dbreplication status on
the CLI to determine the location and cause of the failure.
•
2 = Good Replication.
•
3 = Replication. A counter value of 3 indicates replication
in the cluster is bad. It does not mean that replication
failed on a particular server in the cluster. Cisco
recommends that you run utils dbreplication status on
the CLI to determine the location and cause of the failure.
•
4 = Replication setup did not succeed.
Partition
The Partition object provides information about the file system, its usage in the system, and the
disk utilization on a per-partition basis on the system.
DescriptionCounter
The percentage of CPU time that is dedicated to handling
IO requests that were issued to the disk.
% CPU Time
The percentage of disk space that is in use on this file system.% Used
Not used. It has been rendered obsolete by the Await Read
Time counter
% Wait in Read
Not used. It has been rendered obsolete by the Await Write
Time counter.
% Wait in Write
The average time, measured in milliseconds, for read requests
issued to the device to be served.
Await Read Time
The average time, measured in milliseconds, for I/O requests
that were issued to the device to be served. This includes the
Await Time
time that the requests spent in queue and the time that was
spent servicing them
The average time, measured in milliseconds, for write
requests that are issued to the device to be served.
Await Write Time
The average queue length for the requests that were issued
to the disk.
Queue Length
The amount of data in bytes per second that was read from
the disk.
Read Bytes Per Sec
The amount of total disk space in megabytes that is on this
file system.
Total Mbytes
The amount of disk space in megabytes that is in use on this
file system.
Used Mbytes
Administration Console User Guide for Cisco Unified Intelligence Center Release 8.0(3)
69
Chapter 7: Tools Drawer
RTMT