Maintenance Manual

DescriptionCounter
interfaces) that contained errors that prevented them from being
deliverable to a higher layer protocol
This represents the number of multicast packets that was
received on this interface.
Rx Multicast
This represents the number of packets that this sublayer
delivered to a higher sublayer. This does not include the packets
Rx Packets
that were addressed to a multicast or broadcast address at this
sublayer.
This represents the total number of received (Rx) bytes and
transmitted (Tx) bytes.
Total Bytes
This represents the total number of received (Rx) packets and
transmitted (Tx) packets.
Total Packets
This represents the total number of octets, including framing
characters, that was transmitted out of the interface.
Tx Bytes
This represents the number of outbound packets that was
chosen to be discarded even though no errors were detected.
Tx Dropped
Discarding a packet prevents the packet from being delivered
to a higher layer protocol, for example, to free up buffer space.
This represents the number of outbound packets (for
packet-oriented interfaces) and the number of outbound
Tx Errors
transmission units (for character-oriented or fixed-length
interfaces) that could not be transmitted because of errors.
This represents the total number of packets that the higher level
protocols requested for transmission, including those that were
Tx Packets
discarded or not sent. This does not include packets that were
addressed to a multicast or broadcast address at this sublayer.
This represents the length, measured in packets, of the output
packet queue.
Tx QueueLen
Number of Replicates Created and State of Replication
The Number of Replicates Created and State of Replication object provides real-time replication
information for the system.
DescriptionCounter
Displays the number of replicates that were created by
Informix for the DB tables. This counter displays
information during Replication Setup.
Number or Replicates Created
This counter represents the state of replication. The
following list provides possible values:
Replicate_State
•
0 = Initializing. The counter equals 0 when the server is
not defined or when the server is defined but realizes the
template has not completed.
Administration Console User Guide for Cisco Unified Intelligence Center Release 8.0(3)
68
Chapter 7: Tools Drawer
RTMT