Maintenance Manual

DescriptionCounter
The number of IP datagrams that were successfully fragmented
at this entity
Frag OKs
The number of input datagrams that were delivered to IP user
protocols. This includes Internet Control Message Protocol
(ICMP).
In Delivers
The number of input IP datagrams where no problems were
encountered, but which were discarded. Lack of buffer space
In Discards
provides one possible reason. This counter does not include
any datagrams that were discarded while awaiting reassembly.
The number of input datagrams that were discarded with header
errors. This includes bad checksums, version number mismatch,
In HdrErrors
other format errors, time-to-live exceeded, and other errors
that were discovered in processing their IP options.
The number of input datagrams that were received from all
network interfaces. This counter includes datagrams that were
received with errors
In Receives
The number of locally addressed datagrams that were received
successfully but discarded because of an unknown or
unsupported protocol.
In UnknownProtos
The number of incoming IP datagrams that were received and
the number of outgoing IP datagrams that were sent.
InOut Requests
The number of output IP datagrams that were not transmitted
and were discarded. Lack of buffer space provides one possible
reason.
Out Discards
The total number of IP datagrams that local IP user-protocols
(including ICMP) supply to IP in requests transmission. This
Out Requests
counter does not include any datagrams that were counted in
ForwDatagrams.
The number of IP reassembly failures that the IP reassembly
algorithm detected, including time outs, errors, and so on. This
Reasm Fails
counter does not represent the discarded IP fragments because
some algorithms, such as the algorithm in RFC 815, can lose
track of the number of fragments because it combines them as
they are received.
The number of IP datagrams that were successfully
reassembled.
Reasm OKs
The number of IP fragments that were received that required
reassembly at this entity.
Reasm Reqds
Memory
The memory object provides information about the usage of physical memory and swap memory
on the server.
Administration Console User Guide for Cisco Unified Intelligence Center Release 8.0(3)
65
Chapter 7: Tools Drawer
RTMT