Maintenance Manual

DescriptionCounter
provides one possible reason. This counter does not include
any datagrams that were discarded while awaiting reassembly.
The number of input datagrams that were discarded with
header errors. This includes bad checksums, version number
In HdrErrors
mismatch, other format errors, time-to-live exceeded, and
other errors that were discovered in processing their IP options.
The number of input datagrams that were received from all
network interfaces. This counter includes datagrams that were
received with errors
In Receives
The number of locally addressed datagrams that were received
successfully but discarded because of an unknown or
unsupported protocol.
In UnknownProtos
The number of incoming IP datagrams that were received and
the number of outgoing IP datagrams that were sent.
InOut Requests
The number of output IP datagrams that were not transmitted
and were discarded. Lack of buffer space provides one possible
reason.
Out Discards
The total number of IP datagrams that local IP user-protocols
(including ICMP) supply to IP in requests transmission. This
Out Requests
counter does not include any datagrams that were counted in
ForwDatagrams.
The number of IP reassembly failures that the IP reassembly
algorithm detected, including time outs, errors, and so on.
Reasm Fails
This counter does not represent the discarded IP fragments
because some algorithms, such as the algorithm in RFC 815,
can lose track of the number of fragments because it combines
them as they are received.
The number of IP datagrams that were successfully
reassembled.
Reasm OKs
The number of IP fragments that were received that required
reassembly at this entity.
Reasm Reqds
IP6
The IP6 object, which supports Cisco Unified Communications Manager, provides information
on the IPv6-related statistics on your system.
DescriptionCounter
The number of IP datagrams fragments that have been
generated at this entity.
Frag Creates
The number of IP datagrams that were discarded at this entity
because the datagrams could not be fragmented, such as
datagrams where the Do not Fragment flag was set.
Frag Fails
Administration Console User Guide for Cisco Unified Intelligence Center Release 8.0(3)
64
Chapter 7: Tools Drawer
RTMT