Maintenance Manual

Download and Launch RTMT
On the download page:
1. Select the Windows platform.
2. Click Download.
3. Run the file or save the CuicServRtmtPlugin executable file and then run it from the saved
location.
4. Follow the prompts and click the buttons on the installation screens.
To launch:
1. Launch RTMT from the desktop icon.
Figure 8: RTMT Desktop Icon
2. In the Host IP Address field, enter the IP address for the node you want to monitor.
3. Enter the User Name and Password for a Super User. (Only a Super User can install
RTMT.)
4. Accept the default port (8443).
5. Check Secure Connection.
You see an error if the Host IP Address is not found or there is no network connection.
6. Click Yes to accept the certificate.
7. Click OK to accept the default configuration.
RTMT has extensive online help. Refer to it for information on alerts, performance monitoring,
and collecting and downloading tracing and logging data.
Note: The performance counters are documented in the Administration Console User Guide
for Cisco Unified Intelligence Center. They are not documented in the Online help.
Required Services for Supporting the RTMT Client
RTMT users the following services/servlets:
Administration Console User Guide for Cisco Unified Intelligence Center Release 8.0(3)
48
Chapter 7: Tools Drawer
RTMT