Maintenance Manual

To navigate to this page, click Cluster Configuration > Reporting Configuration and select
the Active Directory tab.
Table 13: Fields on this tab
DescriptionField
Provide the Host name or IP address and the port of the Primary
Active Directory server.
Host Address and Port for
Primary Active Directory
Server
The port defaults to 389.
Provide the Host name or IP address and the port of the
Redundant Active Directory server.
Host Name and Port for
Redundant Active Directory
Server
The port defaults to 389.
Check these boxes if you want the connection from the Unified
device to the Active Directory connection to be encrypted with
SSL while doing authentication.
Use SSL
Enter the Manager Distinguished Name used to login to the
Active Directory server, for example, on a default installation
Manager Distinguished Name
of Microsoft AD: CN=Administrator, CN=users, DC=
MYSERVER, DC=COM. Replace MYSERVER and COM with
your respective hostname.
Enter the Active Directory manager password.Manager Password
Confirm the Active Directory manager password.Confirm Manager Password
Specify the user search base. For example on a default
installation of Microsoft AD, CN=users, DC=MYSERVER,
User Search Base
DC=COM Replace MYSERVER and COM with your respective
hostname.
Note: This example assumes you placed the users in the USERS
subtree of AD. If you created a new organizational unit within
your subtree, then the syntax would be: OU=MYUSERS, DC=
MYSERVER, DC=COM. Note that it is "OU=MYUSERS" instead
of "CN=MYUSERS".
The attribute for the User ID. Generally sAMAccountName
is the default attribute used by Microsoft AD server.
Attribute for User ID
The default is sAMAccountName, indicating the short name
(jlopez)
Using userPrincipalName indicates that the user id entered will
be in email format ([e-mail]).
Contact your Active Directory Administrator for the correct
attribute to use.
Click to test the connection to display the test connection status.Test Connection button
Actions on this tab:
Administration Console User Guide for Cisco Unified Intelligence Center Release 8.0(3)
30
Chapter 5: Cluster Configuration Drawer
Reporting Configuration