Maintenance Manual

DescriptionField
•
Unknown - the server or subsystem that communicates with the
Administration Console could not be reached.
•
Stopped - the server is not running.
•
Running (in service) - the server is running and active.
•
Running (partial service) - the server is running, but is not ready to work.
The server may be starting up, or there may be one or more issues, for
instance, the connection to Unified ICM is down.
•
Stopping - the server is in the process of stopping.
Actions from this page
You can access and sign in to a member node.
You can start, shutdown, or restart a device by selecting the radio box for the device and clicking
the appropriate button. Buttons are dimmed for operations not supported on the device at that
time.
The status of the operation is displayed at the bottom of the page. When starting, stopping, or
restarting, a confirmation dialog is displayed to confirm the current action you are performing.
Note: Start, Shutdown, and Restart refer to the application process running on the server, and
not the hardware or operating system.
Do ThisTo
Start the device.Start
Shut down the device. Respond OK or Cancel to the confirmation
message.
Shutdown
Restart the device.Restart
Click the name of the member node to open a sign in page where you
can enter your user name and password.
Sign in to the Reporting
application on a
member node
You can refresh the status at any time. For example, if the status is
unknown, you can change the Refresh for status polling by using the
drop down menu on the upper-right of the page and click Go.
Refresh dropdown
Refresh options are: No refresh | Once | Every 30 seconds | Every 1
minutes | Every 5 minutes | Every 10 minutes.
See also: Troubleshooting Contol Center (http://docwiki.cisco.com/wiki/
Troubleshooting_Tips_for_Unified_IC_8.0)
Administration Console User Guide for Cisco Unified Intelligence Center Release 8.0(3)
28
Chapter 4: Control Center Drawer