Maintenance Manual

Table 6: Policy Tab
DescriptionField
Specify the number of allowed failed logon attempts. When
this threshold is reached, the system locks the account.
Failed Logon
Allowed range is 0 to 10. To allow unlimited logon attempts,
enter a value of 0 or check the No Limit for Failed Logons
box.
Specify the number of minutes before the counter is reset for
failed logon attempts. After the counter resets, the user can
try logging in again. Allowed range is 0 to 120; default is 30.
Reset Failed Logon Attempts
every (minutes)
Specify the number of minutes an account remains locked
when the number of failed logon attempts exceeds the
Locked Duration (minutes)
specified threshold. Allowed range is 0 to 120; default is 30.
Checking the Administrator Must Unlock check box means
that the account must be unlocked manually.
Specify the number of minutes that are required before a user
can change credentials again. Allowed range is 0 to 120;
default is 0.
Minimum Duration Between
Credential Changes (minutes)
Enter an integer here to define in how many days this user's
credentials shall expire. After this many days has elapsed,
Credentials Expire After (days)
the user will no longer be able to login. Optionally you can
check Never Expires to have the credentials never expire.
Minimum number of characters for the password.Minimum Credential Length
Specify the number of previous passwords that the system
stores. The system does not allow changing the password if
Stored Number of Previous
Credentials
the new password matches with any of the stored passwords.
The maximum permissible value for this field is 15; the
default value is 5, indicating that the new password should
not be the same as the last 5 passwords.
Specify the number of days that a password can remain
inactive before the account gets locked. Allowed range is 0
to 5000; default is 0.
Inactive Days Allowed
Specify the number of days before a user password expires
to start warning notifications. Allowed range is 0 to 90;
default is 0.
Expiry Warning Days
Check this check box to require the system to disallow
credentials that are easily hacked, such as common words,
repeated character patterns, and so on.
Check for Trivial Passwords
The values on the Policy tab apply to all Super Users.
Administration Console User Guide for Cisco Unified Intelligence Center Release 8.0(3)
13
Chapter 2: Admin User Management Drawer
Configure User