Maintenance Manual

no inservice
rserver host CUIC-SRV-8
Ip address 10.86.228.37
no inservice
Step 5
Configure the server farm:
Serverfarm host CUIC_ FARM_SRV
Probe CUIC_ PROBE_SRV
rserver CUIC-SRV-1 8081
inservice
rserver CUIC-SRV-2 8081
inservice
rserver CUIC-SRV-3 8081
inservice
rserver CUIC-SRV-4 8081
inservice
rserver CUIC-SRV-5 8081
inservice
rserver CUIC-SRV-6 8081
inservice
rserver CUIC-SRV-7 8081
inservice
rserver CUIC-SRV-8 8081
inservice
Step 6
Configure probe (to determine if the Unified IC server is running):
Probe http CUIC_ PROBE_SRV
port 8081
interval 6
faildetect 3
passdetect interval 6
passdetect count 3
receive 5
request method get url /cuic/probe
expect status 200 200
open 1
Step 7
Configure sticky. ('Sticky' allows the same client to maintain multiple simultaneous or subsequent
http connections with the same real server for the duration of a session.)
sticky ip-netmask 255.255.255.255 address source
srcip-sticky-CUIC timeout 10 serverfarm CUIC_FARM_SRV
Step 8
Configure map and policies:
class-map match-all CUIC_HTTP_CLASS_L3
2 match virtual-address 10.86.yyy.xxx tcp any
policy-map type management first-match remote_mgmt_allow_policy
class class-default
permit
policy-map type loadbalance first-match CUIC_HTTP_POLICY_L7
class class-default
sticky-serverfarm srcip-sticky-CUIC
policy-map multi-match CUIC_CLIENT_POLICY
class CUIC_HTTP_CLASS_L3
loadbalance vip inservice
loadbalance policy CUIC_HTTP_POLICY_L7
nat dynamic 1 vlan 300
Administration Console User Guide for Cisco Unified Intelligence Center Release 8.0(3)
155
Load Balancing