Maintenance Manual

utils snmp walk

This command is used to walk the SNMP MIB starting with the speciﬁed OID.

COMMAND: utils snmp walk <version> <community> <ip-address> <object> [ﬁle]

PARAMETERS:

version is 1 or 2c.

community is the community string.

ip-address is the IP address of the server.

object is the Object ID.

OPTION [ﬁle] is the ﬁlename to walk.

utils soap realtimeservice test

This soap test executes number of test cases on the remote server as speciﬁed by a parameter

of remote-ip , remote-http-user, or remote-http-password.

COMMAND: utils soap realtimeservice test <remote-ip> <remote-http-user>

<remote-http-password>

PARAMETERS: (At least one parameter is required.)

remote-ip = remote ip address of the machine under test

remote-http-user= remote http user who has role to access soap api

remote-http-password = remote http users password

utils system

These commands perform system operations.

utils system restart

This command restarts the server after presenting a conﬁrmation (yes | no) message.

COMMAND: utils system restart

utils system shutdown

This command shuts the server down after presenting a conﬁrmation (yes | no) message.

Administration Console User Guide for Cisco Unified Intelligence Center Release 8.0(3)

150

Command Line Interface

Utils Commands