Maintenance Manual

utils service stop

This command stops a service.

COMMAND: utils service stop serv

PARAMETER serv is the name of the service to stop.

utils snmp

utils snmp get

This command gets the SNMP data for the speciﬁed MIB OID.

COMMAND: utils snmp walk <version> <community> <ip-address> <object> [ﬁle]

PARAMETERS:

version is 1 or 2c.

community is the community string.

ip-address is the IP address of the server.

object is the Object ID.

OPTION [ﬁle] is the ﬁlename to get.

utils snmp hardware-agents

COMMANDS:

utils snmp hardware-agents restart

This command restarts all of the SNMP agents provided by the vendor of the hardware.

utils snmp hardware-agents status

This command shows the status of the SNMP agents provided by the vendor of the hardware.

Note that not all hardware agents provide status.

utils snmp test

This snmp test sends sample alarms to local syslog, remote syslog and snmp trap.

COMMAND: utils snmp test

Administration Console User Guide for Cisco Unified Intelligence Center Release 8.0(3)

149

Command Line Interface

Utils Commands