Maintenance Manual

•

unset network dns (page 135)

unset cuic-properties

Use this command to unset the translation of host-to-ip

COMMAND: unset cuic-properties host-to-ip hostname

unset ipsec

Use these commands to disable ipsec policies.

COMMAND: unset ipsec policy_group [group | all] Use to disable all policies within a group

or all groups.

COMMAND: unset ipsec policy_name [policy_group] [policy_name] Use to disable a policy

with a given policy name and group. Example:set ipsec policy_name group1 name1

unset network dns

COMMANDS:

unset network dns options [options] This command unsets DNS options and will cause a

temporary loss of network connections.

OPTIONS:

[timeout] sets the wait time before the system considers a DNS query failed to the default.

[attempts] sets the number of DNS attempts to make before failing to the default.

[rotate] sets the method for selecting a nameserver to the default. This affects how loads are

distributed across nam

eservers.

unset ipv6 [policy_group] [ policy_name] These commands disable the policy group or all

groups, or a policy with a speciﬁed group and name.

unset_host-to-ip

Use this command to remove any host-to-ip conﬁguration that were deﬁned with the command

set cuic-properties host-to-ip (page 105)

Running this command removes the node-speciﬁc override for the IP address of the UCCE

databases and reverts to the default for the UCCE databases as conﬁgured in the Data Sources

page.

Administration Console User Guide for Cisco Unified Intelligence Center Release 8.0(3)

135

Command Line Interface

Unset Command