Maintenance Manual

set commandcount disable

set cuic-properties

Use these commands to set values for the cuic database and session timeout.

COMMANDS:

set cuic-properties host-to-ip

PARAMETER <host> <ip-address>

This command sets the host-to-ip translation and is used when there is a need to conﬁgure and

IP address for one of the UCCE Databases that is unique to the member node from which you

are running the command. This command allows for scalability and overrides the default

Historical or Realtime database server that is deﬁned in the Data Sources interface.

For <host>, enter the value for the host DNS name for the server, as displayed on the Data

Sources interface.

For <ip-address>, enter the IP address of the server for the Historical or Realtime database.

set cuic-properties purge-time

PARAMETER HH:MM AM or PM

This command sets the time of day when the cuic database will be purged. The default is 12:00

AM.

set cuic-properties purge-retention

PARAMETER #number of days

This command sets the number of day(s) that data in the cuic database is retained before it gets

purged. The default is one day.

set cuic-properties session-timeout

PARAMETER #numberofSeconds

This command sets the Session Timeout for the Uniﬁed IC Reporting web application. The

default is 14,400 seconds (4 hours).

set ipsec

Use these commands to enable ipsec policies.

COMMAND: set ipsec policy_group [group | all] Use to enable all policies within a group or

all groups.

Administration Console User Guide for Cisco Unified Intelligence Center Release 8.0(3)

105

Command Line Interface

Set Commands