Manual

RangeDefaultDescriptionField
You must congure secure communications
before you enable this option. See Chapter
6 in the Conguration and Administration
Guide for Unied Customer Voice Portal.
A given Call Server can
only be associated with
one Reporting Server.
NoneSelect one or more Call Servers to associate
with the Reporting Server. You must select
at least one Call Server. Call data for all SIP,
Associate Call Servers
H.323, and VoiceXML calls handled by this
Call Server will be stored in the Reporting
Database. Click the right arrow to add a Call
Server to the Selected pane.
Click the left arrow to remove a Call Server
from the Selected pane.
Configuring Reporting Properties
You can congure Reporting Server settings on the Reporting Properties Tab.
Table 2: Reporting Server Reporting Properties Tab Configuration Settings
Restart
Required
RangeDefaultDescriptionField
Conguration
YesYes or NoYesEnables the Reporting Server to
receive call data from the associated
Call Server(s).
Enable Reporting
No1 through 1000100Denes the maximum size of the le
used to record the data feed messages
Max. File Size (MB):
during a database failover. Note that
this can be limited by the amount of
free disk space.
QoS
Yesaf11, af12, af13,
af21, af22, af23,
defaultEnables Quality of Service (QoS)
between the Reporting Server and the
Call Server.
Select QoS Level
af31, af32, af33,
af41, af42, af43,
Note: For more information, see
Implementing Quality of Service
cs1, cs2, cs3, cs4,
cs5, cs6,
cs7,default, ef
Policies with DSCP (Document ID:
10103) at http://www.cisco.com/
warp/public/105/dscpvalues.html.
Reporting Guide for Cisco Unified Customer Voice Portal Release 4.1(1)
20
Chapter 3: - Configuring the Reporting Server
Adding a Reporting Server to the Operations Console