Installation Guide

f.
Select Customize settings for each service.
g.
Check Auto-start service.
h.
Click Next.
i.
A pop-up dialog explaining a dependency appears, click OK.
Step 13
Under Authentication Mode:
a.
Select the Windows Authentication or the SQL Authentication mode.
If you select the Windows Authentication mode enter the:
1. ICM instance name
2. Login ID
3. User password
Note: User must be able to log into the ICM Logger with read privileges.
If you select the SQL Authentication mode enter the:
1. ICM instance name
2. Login ID
3. User password
Note: User must have read access to the ICM Logger database.
•
Enter
b.
Click Next.
Step 14
On the Collation Settings screen:
a.
Click Collation Designer.
b.
Be sure that Latin1_General is selected.
Note: See Using the EDMT to Verify System Conditions (page 77) for other acceptable collation
values.
c.
Set the Sort Order to Binary.
d.
Leave other files set to their default values.
e.
Click Next.
Upgrade Guide Cisco ICM/IPCC Enterprise & Hosted Editions Release 7.0(0)
43
Chapter 6: Setting Up the Hardware
Installing Microsoft SQL Server 2000