Installation Guide

Run Timings, Technology Refresh and Common Ground
The tables below provide high level guidelines for the upgrade times for Loggers and HDSs
based on the hardware as defined in the Cisco ICM/IPCC Enterprise and Hosted Edition
Hardware and System Software Specification (Bill of Materials) (http://www.cisco.com/
en/US/products/sw/custcosw/ps1001/products_user_guide_list.html), and results observed
during internal upgrade testing. Actual times will vary based on the parameters discussed in the
Introduction to ICM/IPCC Upgrade (page 23).
Table 1: ICM/IPCC 5.0(0) to ICM/IPCC 7.0(0) Logger/HDS Upgrade Time Guidelines
Migration Time in HoursDatabase SizeLogger or HDSHardware
1 – 210 GBLoggerGEN-30-001-Class
0.5 – 1.510 GBLoggerMCS-30-001-Class
2 – 420 GBHDSMCS-30-001-Class
1 – 2.520 GBHDSMCS-40-003-Class
3 – 640 GBHDSMCS-40-003-Class
1 – 340 GBHDSGEN-50-004-Class
4 – 1170 GBHDSGEN-50-004-Class
Note: The actual data migration time is
effected by the distribution of data within the
database. For example, a database with only a
few records over the 7,000,000 copy/drop
migrates much faster than a database with
many large copy/drop tables.
Table 2: ICM/IPCC 6.0(0) to ICM/IPCC 7.0(0) Logger/HDS Upgrade Time Guidelines
Migration Time in HoursDatabase SizeLogger or HDSHardware
1 – 210 GBLoggerGEN-30-001-Class
0.5 – 1.510 GBLoggerMCS-30-001-Class
2.5 – 4.520 GBHDSMCS-30-001-Class
2 – 420 GBHDSMCS-40-003-Class
3 – 640 GBHDSMCS-40-003-Class
2 – 540 GBHDSGEN-50-004-Class
10 – 1570 GBHDSGEN-50-004-Class
Note: The actual data migration time is
effected by the distribution of data within the
database. For example, a database with only a
few records over the 7,000,000 copy/drop
migrates much faster than a database with
many large copy/drop tables.
Upgrade Guide Cisco ICM/IPCC Enterprise & Hosted Editions Release 7.0(0)
32
Chapter 5: - ICM/IPCC 7.0(0) Upgrade Time and Space Requirements
Time Guidelines and Migration Performance Values