Manual

Cisco Systems, Inc. Page 66
66
Cisco Unified CallConnector Mobility Service
Technical Overview
Step 5. frequency frequency-1 [frequency-2]
Step 6. cadence {cycle-1-on-time cycle-1-off-time [cycle-2-on-time cycle-2-off-time] [cycle-
3-on-time cycle-3-off-time] [cycle-4-on-time cycle-4-off-time]} | continuous
Step 7. end
Configuring SCCP for Cisco Unified CME
To enable Skinny Client Control Protocol (SCCP) on Cisco Unified CME, perform the following
steps:
Summary Steps
Step 1. enable
Step 2. configure terminal
Step 3. sccp local interface-type interface-number [port port-number]
Step 4. sccp ccm {ip-address | dns} identifier identifier-number [priority priority] [port port-
number] [version version-number]
Step 5. sccp ccm group group-number
Step 6. bind interface interface-type interface-number
Step 7. exit
Step 8. sccp
Step 9. exit
Configuring the DSP Farm
To configure the DSP farm profile for multi-party ad hoc and meet-me conferencing, perform the
following steps.
Note: The DSP farm can be on the same router as the Cisco Unified CME or on a different router.
Summary Steps
Step 1. enable
Step 2. configure terminal
Step 3. dspfarm profile profile-identifier conference
Step 4. codec {codec-type | pass-through}
Step 5. conference-join custom-cptone cptone-name
Step 6. conference-leave custom-cptone cptone-name
Step 7. maximum conference-party max-parties
Step 8. maximum sessions number
Step 9. associate application sccp
Step 10. end
Associating Cisco Unified CME with a DSP Farm Profile
To associate a DSP farm profile with a group of Cisco Unified CME routers that control DSP
services, perform the following steps.