Manual

Cisco Systems, Inc. Page 132
132
Cisco Unified CallConnector Mobility Service
Technical Overview
At this point, all required configs are in place to make and transfer calls directly to voicemail using a
bulk speed-dial.
Verify
In order to verify the functionality, after the system is configured, dial #01 on any CME phone. This
should take you to Adam’s voicemail greeting. Similarly, making a call to #02 should take you to
Bob’s greeting. This tests basic functioning of the setup. If this does not work, follow steps below to
see that the system is setup correctly.
This section provides instructions to confirm that your configuration works properly.
CCME#sh telephony-service
CONFIG (Version=4.0(0))
=====================
Version 4.0(0)
Cisco CallManager Express
For on-line documentation please see:
www.cisco.com/univercd/cc/td/doc/product/access/ip_ph/ip_ks/index.
htm
ip source-address 20.20.20.21 port 2000
max-ephones 24
max-dn 48
max-conferences 12 gain -6
dspfarm units 0
dspfarm transcode sessions 0
hunt-group report delay 1 hours
hunt-group logout DND
max-redirect 5
voicemail 6000
cnf-file location: system:
cnf-file option: PER-PHONE-TYPE
network-locale[0] US (This is the default network locale for
this box)
network-locale[1] US
network-locale[2] US
network-locale[3] US
network-locale[4] US
user-locale[0] US (This is the default user locale for this box)
user-locale[1] US
user-locale[2] US
user-locale[3] US
user-locale[4] US
srst mode auto-provision is OFF
srst ephone template is 0
srst dn template is 0