Manual

Cisco Systems, Inc. Page 128
128
Cisco Unified CallConnector Mobility Service
Technical Overview
The external flash card on the integrated services routers holds the router image, VLAN
database, graphical user interface (GUI) files for Cisco CME and Cisco Unity Express. It
should not be removed during the normal operation of the router.
Network
The network contains a CME router with an NM-CUE. IP Phones are connected to the HWICD-
9ESW and analog line is connected to VIC2-4FXO.
Dial plan
Before configuring CME and CUE, you should plan your dial plan for CME IP phones, CUE and
bulk speed-dial on CME. The following is a sample of numbers that need to be defined before
configuring the system.
Name
Number
Description
IP Phones (with Voicemail)
1001,
1002,
1003
Ephone-dn numbers of IP phones that have a
voicemail mailbox.
Bulk speed-dial prefix
#
Bulk speed-dial prefix is used to access bulk
speed-dial numbers. # is default but this can be
changed to * or #/* followed by other numbers.
Bulk speed-dial file for direct
access to VM
0
This is the reference to a file that contains
entries for bulk speed-dial codes. This is used
in conjunction with bulk speed-dial prefix and
list entry to address a particular number
Bulk speed-dial entries
1,2,3
Each speed-dial is referred to by an entry. This
is used in conjunction with bulk speed-dial
prefix and file reference to refer to a particular
number. In this example, 1 would refer to 1001,
2 to 1002, 3 to 1003.
CUE AA pilot for direct
transfer to VM script
6500
Trigger on CUE for direct transfer to VM script.
Configuration – Router
!
voice service voip
allow-connections h323 to sip
!
interface Service-Engine1/0
ip address 20.20.20.21 255.255.255.0
service-module ip address 20.20.20.20 255.255.255.0
service-module ip default-gateway 20.20.20.21