Manual

Cisco Systems, Inc. Page 125
125
Appendix B
Step 7
softkeys connected [Acct] [ConfList]
[Confrn] [Endcall] [Flash] [HLog] [Hold]
[Join] [Park] [RmLstC] [Select] [Trnsfer]
Example:
Router(config-ephone-template)#
softkeys connected Hold Trnsfer Park
Endcall Confrn ConfList Join Select
RmLstC
Configures an ephone template for soft-key
display during the connected call stage.
• The soft keys added are RmLstC,
ConfList, Join, and Select.
• The number and order of soft key
keywords you enter in this command
correspond to the number and order of soft
keys on your phone.
Step 8
softkeys hold [Join] [Newcall] [Resume]
[Select]
Example:
Router(config-ephone-template)#
softkeys hold Join Newcall Resume
Select
Configures an ephone template to modify
soft-key display during the call-hold call
stage.
• The soft keys added are Join and
Select.
• The number and order of soft key
keywords you enter in this command
correspond to the number and order of soft
keys on your phone.
Step 9
softkeys idle [Cfwdall] [ConfList] [Dnd]
[Gpickup] [HLog] [Join] [Login] [Newcall]
[Pickup] [Redial] [RmLstC]
Example:
Router(config-ephone-template)#
softkeys idle ConfList Gpickup Join
Login Newcall Pickup Redial RmLstC
Configures an ephone template for soft-key
display during the idle call stage.
• The soft keys added for multi-party
conferencing are RmLstC, ConfList, and
Join.
• The number and order of soft key
keywords you enter in this command
correspond to the number and order of soft
keys on your phone.
Step 10
softkeys seized [CallBack] [Cfwdall]
[Endcall] [Gpickup] [HLog] [MeetMe]
[Pickup] [Redial]
Example:
Router(config-ephone-template)#
softkeys seized Redial Endcall Cfwdall
Pickup Gpickup Callback Meetme
(Optional) Configures an ephone template for
soft-key display during the seized call stage.
• You must configure the MeetMe soft key
in the seized state for the ephone to initiate a
meet-me conference.
• The number and order of soft key
keywords you enter in this command
correspond to the number and order of soft
keys on your phone.
Step 11
exit
Example:
Router(config-ephone-template)# exit
Exits ephone-template configuration mode.