Manual

Cisco Systems, Inc. Page 124
124
Cisco Unified CallConnector Mobility Service
Technical Overview
Configuring Conferencing Options for a Phone
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
• Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
ephone-template template-tag
Example:
Router(config)# ephone-template 1
Enter ephone-template configuration mode to
create an ephone template to configure a set
of phone features.
Step 4
conference add-mode [creator]
Example:
Router(config-ephone-template)#
conference add-mode creator
(Optional) Configures the mode for adding
parties to conferences.
• creator—Only the creator can add
parties to the conference.
Step 5
conference drop-mode [creator | local]
Example:
Router(config-ephone-template)#
conference drop-mode creator
(Optional) Configures the mode for dropping
parties from multi-party ad hoc and meet-me
conferences.
• creator—The active conference
terminates when the creator hangs up.
• local—The active conference terminates
when the last local party in the conference
hangs up or drops out of the conference.
Step 6
conference admin
Example:
Router(config-ephone-template)#
conference admin
(Optional) Configures the ephone as the
conference administrator. The administrator
can:
• Dial in to any conference directly through
the conference number
• Use the ConfList soft key to list
conference parties
• Remove any party from any conference